We're here with a quick guide on how to attach PVC to wood. Gluing PVC to wood might seem straightforward, and it is! With the proper tools and a bit of patience, every beginner mechanic will be able to do it.
We've got four options for you - hot glue, epoxy, contact cement, and heavy duty super glue. Pick your favorite and read on!
Use Hot Glue
A surprising number of people who want to learn how to attach PVC to wood never heard of a hot glue gun. Follow these steps:
Step 1 - Prepare the glue gun: Before using the glue gun, you need to get it hot and ready. Plug it into an outlet that is close to your working area.
Step 2 - Load the glue gun: Insert the stick of glue into the opening in the backside of the glue gun. Choose a glue stick for hot temperature as they provide the strongest bond for PVC.
Step 3 - Apply glue to both surfaces: Use your best judgment and a sense of strategy to apply the glue to both surfaces, emphasizing the areas that will provide more contact.
Step 4 - Press the objects together: When pressing the objects together, make sure that the largest one is resting securely on a flat working surface. Then, place the smallest object on the desired area and exert pressure with firmness.
Step 5 - Let it dry: Finally, leave the glue to dry for 8 to 10 hours.
Anyone who wants to learn how to attach PVC to wood should know about Epoxy. If you want to try this method, follow these steps:
Step 1 - Get an Epoxy applicator kit: Epoxy kits consists of two parts: The resin and the hardener. You can find them at most hardware stores.
Step 2 - Mix the components: Before using the Epoxy, you need to mix its components. To do so, just put a small amount of each onto a flat, disposable surface.
Step 3 - Apply the Epoxy to both surfaces: Using a toothpick or a similar object, apply the mixture to both objects. Make sure to cover as much of the surfaces as possible with a thin but consistently-thick layer of Epoxy.
Step 4 - Fit the objects together: Press both objects together. For better results, place the biggest object on a firm surface and then place the smallest object on it.
Step 5 - Leave it to dry: Epoxy can take up to 20 hours to dry completely.
Use Contact Cement
If you are wondering how to attach PVC to wood using contact cement, just do as follows:
Step 1 - Acquire protective gear: Contact cement can be extremely toxic and abrasive. For that reason, it's vital to wear protective gloves and glasses when working with it.
Step 2 - Prepare the workspace: Apart from being toxic, contact cement emits fumes that, due to being flammable, constitute a safety hazard. For that reason, it's important that you work in a well-ventilated space.
Step 3 - Apply the contact cement to both objects: Using a roll or a brush, apply the material to the surfaces of both the PVC and the wood objects. Take into account that this type of material only adheres to itself, so cover the surfaces of both objects very thoroughly.
Step 4 - Align the materials together: Using spacers, align both objects as tightly as possible.
Step 5 - Apply pressure: Using the same roller you used to apply the material, apply pressure to the objects. This pressure will make the particles of the contact cement bond with each other more tightly.
Step 6 - Correct mistakes: If needed, you can correct small mistakes using a clothes iron. This device will reactivate the cement, allowing you to manipulate it further and correct anything that needs to be corrected.
Use Super Glue
To understand how to attach PVC to wood properly with super glue, take into account the following:
Step 1 - Buy the right type of super glue: Make sure that you get a heavy-duty, high strength adhesive. Gel-based ones tend to work the best.
Step 2 - Sand the PVC: Before applying the super glue to the PVC object, it's best if you sand its surface slightly using soft construction sandpaper.
Step 3 - Clean the wooden object: Likewise, it's important to prepare the wooden object before attempting to attach it to the PVC. To do this, simply clean the surface using a damp cloth. However, be careful not to wet the wood too much as this could prevent it from taking the glue well.
Step 4 - Apply super glue to both surfaces: Finally, it is time to apply the super glue to both the PVC piece and the wooden object. Apply it carefully and slowly as only a little bit is necessary for each large surface area that will make contact.
Step 5 - Press the objects together: Press the smaller piece against the larger piece. Once both pieces are firmly set against each other, keep constant pressure for at least a minute. Make sure, however, not to accidentally move the pieces as you press them together.
Step 6 - Let everything dry: Lastly, all you have to do is wait for the super glue to dry. This will take between two and four hours. However, you could leave it all night to be safe.
Now that you know how to attach PVC to wood, your life is going to be a lot easier. Hopefully, you will be able to apply this knowledge to many important and meaningful projects. Which method for attaching PVC to wood did you like the most? Let us know in the comment section below!